|
|
Order by: |
Buy It Now
Free Shipping
Condition: Used Location: Hayden, United States
Thank you for your interest in this quality headset with a history of moderate use. The finish has sun fade, surface marks and scratches. The cups fit a straight 1.5 inch steerer. The matching pre-loader is adjustable to fit various headtube lengths.
Buy It Now
Free Shipping
Condition: New Location: San Francisco, United States
EC34 / EC 49 - Tapered 1 1/8" to 1.5". Chris King NoThreadSet. Sotto Voce. Bottom: 49mm external cup for 1.5" steer tube. Top: 34mm external cup for 1 1/8" steer tube.
Buy It Now
$7.99 Shipping
Condition: New Location: Sparks, United States
52mm 45x45 lower bearing. Color Matte Turquoise. Compatible with King baseplate and 45 degree integrated crown races. Defined Color Green. Crown Race 30.
Buy It Now
$4.99 Shipping
Condition: New Location: Boca Raton, United States
This headset that balances low stack height with a clean aesthetic. This Chris King InSet 7 Headset is in new condition. Chris King. Every bike we list is owned, inspected, and held by us; we donât consign or list for others.
Buy It Now
Free Shipping
Condition: New Location: Peabody, United States
We created our InSet™ family of headsets by applying the legendary form and function of Chris King headsets to fit solutions for a wide variety of tapered and oversized headtubes and steerer tubes being utilized in modern bicycle design.
0 bids Free Shipping
Condition: Used Location: Bellingham, United States
Chris King NoThreadSet in nearly flawless condition. Headset was installed but only ridden a few times, There are a couple signs of installation/removal but nothing that will show once installed, both bearings feel buttery smooth. Check photos for more details. Includes upper and lower cups, crown race (base plate), upper race, top cap, bolt, and 2 headset spacers.
0 bids Free Shipping
Condition: Used Location: Portland, United States
Very good condition Chris King 1 Inch threaded headset, silver
Buy It Now
Free Shipping
Condition: New Location: Moab, United States
For use with a standard non-tapered 1 1/8" fork steerer. Avoid the higher stack height of external bearings. And it is pretty, too.
Buy It Now
$14.99 Shipping
Condition: Used Location: Blue Mounds, United States
The upper cup is an EC34, which is a standard 1 1/8" headtube size. The lower is an EC44. This headset will fit a standard 1.5" -> 1 1/8" tapered steerer fork. If you want to run a straight 1 1/8" steerer, or a 1 1/4" (at the base) tapered steerer, you can, but you'll need a different baseplate.
Buy It Now
$9.99 Shipping
Condition: Used Location: Blue Mounds, United States
Chris King Tapered external cup headset. EC34 upper cup (standard 1 1/8" size). EC49 lower cup. 1.5" bearing plate. Includes a 20mm spacer in matching red color.
Buy It Now
$7.00 Shipping
Condition: Used Location: San Ramon, United States
It has just been sitting idle so I am passing this along. It is used with only minor scuffs and blemishes from being professionally removed. They are all on the underside areas of the headset and not visible when installed.
0 bids Free Shipping
Condition: New Location: Steamboat Springs, United States
The product is a Chris King InSet i7 ZS44/EC44Headset in a silver color, with a diameter of 44mm. It includes a headset, headset cap, and bearings. Made in the United States, this headset is designed for performance mountain, gravel, or road bicycles. This is a new in box product, never been installed.
0 bids Free Shipping
Condition: Used Location: Steamboat Springs, United States
The product is a Chris King InSet i7 ZS44/EC44Headset in a gold color, with a diameter of 44mm. It includes a headset, headset cap, and bearings. Made in the United States, this headset is designed for performance mountain, gravel, or road bicycles. This is a used product, 9/10 condition. Installed on one bike previously.
Buy It Now
Free Shipping
Condition: New Location: Lexington, United States
InSet 2 has 44mm upper internal cup, 56mm lower internal cup, 1.5" baseplate. The Chris King InSet 2 combines legendary performance in a precision low stack tapered 44mm/56mm headset. The InSet 2 is equipped with in-house built bearings and is designed to give riders the option of a low stack height and effortless hassle-free performance.
Buy It Now
$7.00 Shipping
Condition: Used Location: San Ramon, United States
You’re are looking at a used red Chris King InSet 3 Headset (ZS44 top cup and EC49 lower cup). It is used with only minor scuffs and blemishes from being professionally removed. They are all on the underside areas of the headset and not visible when installed.
0 bids $8.00 Shipping
Condition: New Location: Portland, United States
Part Number PHS625.
Buy It Now
$7.00 Shipping
Condition: Used Location: Philadelphia, United States
Christ King Sotto Voce Black NoThreadset. For using a tapered 1 1/8" to 1 1/2" fork with oversized steerer tubes. Very lightly used. The sleek black aluminum construction is both lightweight and durable, ensuring that your bike is equipped with a top-quality component.
0 bids Free Shipping
Condition: New Location: , SG
FB0054/100050035 CKHSEFB0054000001DAE CHRIS KING HEADSET INSET (44MM/56MM) (PCE) black 1-1/8" & 1.5" taper. • Designed specifically for a 44mm/56mm tapered headtube and a 1-1/8” to 1.5” tapered steerer tube.
Buy It Now
Free Shipping
Condition: New Location: Peabody, United States
From the beginning we wanted the design to include all the qualities that have made King sealed bearing headsets so trustworthy. Any King headset has to be strong enough to live up to our 10-year warranty.
0 bids Free Shipping
Condition: New Location: Bloomfield, United States
Chris King EC i7. Matte Mango. Every Chris King headset is built with our heat-treated bearings, and surgical-grade steel races machined simultaneously to ensure they are perfectly matched. Chris King part # BCM2.
0 bids Free Shipping
Condition: New Location: Steamboat Springs, United States
The product is a Chris King InSet i7 ZS44/EC44Headset in a matte mango color, with a diameter of 44mm. It includes a headset, headset cap, and bearings. Made in the United States, this headset is designed for performance mountain, gravel, or road bicycles. This is a new in box product, never been installed.
0 bids $30.00 Shipping
Condition: New other (see details) Location: , TH
Buy It Now
Free Shipping
Condition: New Location: Peabody, United States
With its stout external lower cup and upper cup the Chris King InSet™ is our precision solution for tapered headtubes. We created our InSet™ family of headsets by applying the legendary form and function of Chris King headsets to fit solutions for a wide variety of tapered and oversized headtubes and steerer tubes being utilized in modern bicycle design.
Buy It Now
Free Shipping
Condition: New Location: Peabody, United States
From the beginning we wanted the design to include all the qualities that have made King sealed bearing headsets so trustworthy. Any King headset has to be strong enough to live up to our 10-year warranty.
Buy It Now
Free Shipping
Condition: Used Location: Oakland, United States
Up for sale is a drop set 5 in very good condition. Used for a year. Color matched spacers are included.
Buy It Now
Free Shipping
Condition: New Location: Chico, United States
If you are buying this for a different Chris King headset other than an InSet 7, you will want to verify compatibility of the "ZS44" and your headset directly with Chris King before buying. Chris King InSet 7 bearing cap, Navy, new, never installed.
0 bids $30.00 Shipping
Condition: New Location: , TH
* International shipping 30$. Product is new condition, meets manufacturer specifications and is guaranteed to function perfectly. Sold without original packaging. * Cup outside diameter 49.6 mm (Head tube diameter Upper and Lower). * New old stock. * The item is not in the United States, it will be dispatched from Thailand via economy international service (25-30 days worldwide). * Due to the Corona pandemic and a high workload of the shipping service providers, delivery times fluctuate. Delays may occur. We ask for your understanding. **NOTE : Please message me before buying, I may be out of the system for sometime then I am not be able to ship in short.
Buy It Now
$4.10 Shipping
Condition: New Location: Brea, United States
Raw titanium crown race for 1-1/2 tapered headsets. Lighter than steel, stronger and longer lasting than aluminum. Split style crown race for easy installation.
Buy It Now
Free Shipping
Condition: New other (see details) Location: Cedar Hill, United States
Upper cup: 44mm InSet; Lower cup: 56mm InSet;. Chris King InSet 2 Headsets. GripLock upgrade is designed to be a long-travel application performance upgrade for InSet. Each NoThreadSet includes a stainless steel baseplate and King's custom starnut with bolt.
0 bids $15.00 Shipping
Condition: Used Location: Westminster, United States
Headset Very nice Condition 1 1/2” Bottom 1 1/8” Top Very Nice
Buy It Now
Free Shipping
Condition: New Location: Peabody, United States
CHRIS KING NTS 1.5 49MM HSE1K Sotto Voce pressfit headset Pink. After more than thirty years of being around 1" headsets, our 1.5 NoThreadSet sure looks a little strange. Who would’ve imagined back in 1976 that bike parts would evolve into this?.
0 bids $15.00 Shipping
Condition: Used Location: Westminster, United States
Cane Creek Headset Very nice Condition 1 1/2” Bottom 1 1/8” Top Very Nice
Buy It Now
$7.99 Shipping
Condition: New Location: Sparks, United States
52mm 45x45 lower bearing. Compatible with King baseplate and 45 degree integrated crown races. Defined Color Red. S.H.I.S Upper IS42. Crown Race 30.
Buy It Now
$7.99 Shipping
Condition: New Location: Sparks, United States
The Chris King InSet 7 combines seamless design and quality in a 44mm headset with an external lower cup that is a precision headset option for your 1.5” tapered steerer fork. the InSet 7 is equipped with exclusive built-in-house bearings and patented GripLock system for precise fit and function.
Buy It Now
$7.99 Shipping
Condition: New Location: Sparks, United States
The Chris King InSet 7 combines seamless design and quality in a 44mm headset with an external lower cup that is a precision headset option for your 1.5” tapered steerer fork. the InSet 7 is equipped with exclusive built-in-house bearings and patented GripLock system for precise fit and function.
Buy It Now
$7.99 Shipping
Condition: New Location: Sparks, United States
Defined Color Red. S.H.I.S Lower IS52. S.H.I.S Upper IS41.
Buy It Now
$7.99 Shipping
Condition: New Location: Sparks, United States
The Chris King InSet 2 combines legendary performance in a precision low stack tapered 44mm/56mm headset. The InSet 2 is equipped with in-house built bearings and is designed to give riders the option of a low stack height and effortless hassle-free performance.
Buy It Now
$7.99 Shipping
Condition: New Location: Sparks, United States
The Chris King InSet 7 combines seamless design and quality in a 44mm headset with an external lower cup that is a precision headset option for your 1.5” tapered steerer fork. the InSet 7 is equipped with exclusive built-in-house bearings and patented GripLock system for precise fit and function.
Buy It Now
Free Shipping
Condition: New Location: , HK
We are a group of young people who addict to bicycle. So all products with batteries will not contain batteries. Designed specifically for 34mm External Top Cup and 49mm External Bottom Cup.
Buy It Now
Free Shipping
Condition: New Location: CAERPHILLY, GB
Naturally every bike is different so there can be slight differences. Start by installing the bike into a workshop stand and prepare the tools required. You will need Allan keys, Paper towel, Degreaser and grease 9. Take the new bearings, apply a little grease and place on the crown race of the fork. The bearings have a chamfer on both side, the side it the chamfer on the outside is the side that fits into the frame or the headset cup 13. Return the top cap and tighten the bolt until it takes up the slack. Its really easy to over tighten this bolt so ensure you give it minimal force or you can damage the bearings. If the bars feel stiff to turn you have over done it. 14. Take the bike out of the stand and give it a bounce on the ground to ensure everything is seated into place. To make su.
Buy It Now
Free Shipping
Condition: New Location: CAERPHILLY, GB
Naturally every bike is different so there can be slight differences. Start by installing the bike into a workshop stand and prepare the tools required. You will need Allan keys, Paper towel, Degreaser and grease 9. Take the new bearings, apply a little gease and place on the crown race of the fork. The bearings have a chamfer on both side, the side it the chamfer on the outside is the side that fits into the frame or the headset cup 13. Return the top cap and tighten the bolt until it takes up the slack. Its really easy to over tighten this bolt so ensure you give it minimal force or you can damage the bearings. If the bars feel stiff to turn you have over done it. 14. Take the bike out of the stand and give it a bounce on the ground to ensure everything is seated into place. To make sur.
Buy It Now
Free Shipping
Condition: New Location: , HK
Designed specifically for a 44mm straight headtube and a 1-1/8” to 1.5” tapered steerer tube. The Chris King InSet 7 combines seamless design and legendary quality in a 44mm headset with an external lower cup that is a precision headset option for your 1.5” tapered steerer fork.
Buy It Now
Free Shipping
Condition: New Location: , HK
Our InSet 5 is built for riders using a 1.5” tapered fork that needs the legendary precision of a Chris King headset on their bike with a 49mm headtube. Our InSet 5 is equipped with our exclusive in-house built bearings and our patented GripLock system to keep your steering precise and dependable.
Buy It Now
Free Shipping
Condition: New Location: , HK
Designed specifically for a 44mm straight headtube and a 1-1/8” to 1.5” tapered steerer tube. The InSet™ 2 is equipped with the legendary in-house built bearings and is designed to give riders the option of a low stack height and effortless hassle-free performance.
Buy It Now
Free Shipping
Condition: New Location: Moab, United States
For use with a standard non-tapered 1 1/8" fork steerer. Avoid the higher stack height of external bearings. And it is pretty, too.
|
|
|
|