|
|
Order by: |
Buy It Now
Free Shipping
Condition: New Location: Denver, United States
Includes Lower 1 bearing, Upper 1 1/8 bearing, Wedge for top Bearing, Alloy Top Plate to fit over the carbon spacer, SuperSIX EVO carbon 30mm conical spacer, and System Integration expanding compression device for carbon steer tubes.
Buy It Now
Free Shipping
Condition: New Location: RUSHDEN, GB
MPN: solute Black. Item Length: 162mm. Item Width: 172mm. Type: Corone.
Buy It Now
Free Shipping
Condition: New other (see details) Location: Oaktown, United States
You are viewing a new CANNONDALE BLACK BICYCLE TAPER HEAD-SET. Bike Tony's Bike World. We will get back to you within 24 hrs (except on weekends). We Will Make It Right! We are human and we can make mistakes.
Buy It Now
$7.99 Shipping
Condition: New Location: Pomona, United States
Cannondale 1-1/4 Bearing Crown Race.
Buy It Now
Free Shipping
Condition: New Location: Trinidad, United States
• Cannondale Part #: KP205/. • Model: KP205/. View All Products. CANCELLATION REQUESTS.
Buy It Now
Free Shipping
Condition: New Location: Laguna Woods, United States
Cannondale Integrated Headset - Adapts Headshok Headsets to use with 1.5" Fork - KP119. There are a couple different kinds. Three 5mm headset spacers. Two sealed bearings. One screw to connect to star nut.
0 bids $6.00 Shipping
Condition: New Location: Spring Lake, United States
Headshok 5 Position Top Cap For Fatty Ultra Cannondale- one of a kind at this point? I’ve never seen another used or otherwise. Never installed I slit the package myself to get clearer pics of it. Ultimate old school cannondale finishing piece- I also have one up for sale that fits the lockout (on or off position) headshok top nut style.
Buy It Now
Free Shipping
Condition: Used Location: Baltimore, United States
Headset top cover, 25mm tall, 48.5mm at the widest, 21mm "overhang" (gap between the wide flange and where the material begin in the inside.)
0 bids Free Shipping
Condition: New Location: American Fork, United States
Original Cannondale headset for 2018 generation Synapse carbon frames.This headset fits frame sizes 44cm and 48cm.Use kit K35018 for 44 and 48cm frames. Use kit K35028 for 51 and 54cm frames. Use kit K35038 for 56, 58, and 61cm frames.Headset includes:Carbon conical spacer. Flat alloy top plate. Upper bearing wedge. 1 1/8" upper bearing. 1 1/8" lower bearing. Crown race not included as it is integrated into the fork.
0 bids $34.60 Shipping
Condition: New Location: , EE
Buy It Now
Free Shipping
Condition: Used Location: Newark, United States
Up for sale is one used OEM Cannondale 1 1/8 Bicycle Headset Top Cap - Matte Black - Uses taper headed bolt - Not included.
Buy It Now
$16.00 Shipping
Condition: New Location: , China
Only fit with Cannondale SuperSix EVO 2020~2022. Upper Headset bearing 1pc. Lower headset bearing 1pc. Race Material: P6 bearing steel. Ball Material:Nitrided Silicon Ceramic SI3N4. 1 year warranty.
Buy It Now
Free Shipping
Condition: New Location: Laguna Woods, United States
Original Cannondale Factory replacement Conceal stem top cap and M8 compression bolt
0 bids Free Shipping
Condition: Used Location: North Hollywood, United States
0 bids $6.00 Shipping
Condition: New Location: Tucson, United States
KCNC Radiant Headset. Semi integrated, for 1-1/8 steer tubes.
Buy It Now
$16.00 Shipping
Condition: New Location: , China
2012-2019 SuperSix EVO. Just like Cannondale KP203 headset. Ball Material:Nitrided Silicon Ceramic SI3N4. Weight of Ceramic Version:64.9 G +39.4 G(Regular Expander) or 64.9 G +6.6 G(Super Light Expander).
Buy It Now
$9.99 Shipping
Condition: Used Location: Boise, United States
Buy It Now
Free Shipping
Condition: New Location: Trinidad, United States
0 bids $13.95 Shipping
Condition: New Location: , HU
FSA VISION ACR CONE SPACER FOR METRON 5D CANNONDALE SUPER6 SUPERSIX EVO 4 SLA FRAME 160-0204000110
Buy It Now
Free Shipping
Condition: New Location: Cedaredge, United States
Lot Of 2 Problem Solver Headtube Reducers To Use Standard Fork In Cannondales.
Buy It Now
$34.67 Shipping
Condition: New other (see details) Location: , Italy
Headset 1" headset Shimano 600 EX NEW IN BOX NEW IN BOX NOS NIB NEW "SUITABLE" FOR: Bianchi, pinarello, heroic, vintage, racing, vintage, Bianchi, Casati, Chiesini, Cinelli, Ciocc, Colnago, De Rosa, Gios, Grandis, Guerciotti, Losa, Marastoni, Marnati, Masi, Moser, Olmo, Patelli, Paletti, Pinarello, Rossin, Scapin, Somec, Wilier Triestina.
Buy It Now
Free Shipping
Condition: New Location: Arlington Heights, United States
Cannondale Road Crow Race KP156. Condition is New. Shipped with USPS Ground Advantage.
0 bids Free Shipping
Condition: New Location: Daphne, United States
Top cap. Easy Peezy. Get what you see. We ship fast — lower 48 USA ONLY.
Buy It Now
Free Shipping
Condition: New other (see details) Location: Pasadena, United States
Brass ring with black rubber seal. This ring is required for proper spacing at installation of Lefty and Headshok steerer tubes and stems. Kit includes one upper bearing seal.
0 bids $5.85 Shipping
Condition: New Location: Bedford, United States
Buy It Now
Free Shipping
Condition: New Location: Laguna Woods, United States
This top plate comes with the SuperSix Evo headset and sits on top of the upper bearing. It goes underneath the conical spacer unless you are taking that off and are slamming that stem. Compatible with SuperSix Evo, CAAD10, CAAD12 and Synapse Carbons models after 2014. 46mm in diameter KP253
Buy It Now
Free Shipping
Condition: New Location: Trinidad, United States
Cannondale Headset Bearing Set. Sold in set of two. View All Products.
0 bids $13.95 Shipping
Condition: New Location: , HU
FSA VISION ACR Spacer for Cannondale Super6 Evo. • ACR cone spacer for Cannondale Super6 Evo SLA. • A fully integrated cable routing.
Buy It Now
Free Shipping
Condition: New other (see details) Location: Pasadena, United States
Brass ring with black rubber seal. This ring is required for proper spacing at installation of Lefty and Headshok steerer tubes and stems. Kit includes one upper bearing seal.
Buy It Now
Free Shipping
Condition: New Location: Conroe, United States
Full manufacturer's warranty. To run alongside the conventional 1 1/8 threadless headset. Split crown race. The bearings also incorporate their own sealing and being made from stainless steel resist corrosion and its by-products much better than a conventional steel bearing.
Buy It Now
Free Shipping
Condition: Used Location: Washington, United States
Good condition, lower was used with Cannondale Headshok 1.5” to tapered fork - see photo 3, this will replace your bottom cup and bearing. If your bike has bearings inside headtube, known as Si-system integration-you can still use this but the cup will only go in half way.
Buy It Now
Free Shipping
Condition: New Location: Grand Rapids, United States
Crown Race: 40. We The People Compact Headset With 2x 3mm Spacers Black. Lower Stack Height: 1. S.H.I.S Lower: IS52. Our motto is 'All Riders, No Attitude!'. We're here to provide friendly and personal service for all cyclists.
Buy It Now
Free Shipping
Condition: New Location: Denver, United States
Includes Lower 1 bearing, Upper 1 1/8 bearing, Wedge for top Bearing, Alloy Top Plate to fit over the carbon spacer, SuperSIX EVO carbon 30mm conical spacer, and System Integration expanding compression device for carbon steer tubes.
Buy It Now
Free Shipping
Condition: New Location: American Fork, United States
- Custom i -house designed seals - Enduro stainless bearings - Uppers include a 5mm integrated spacer stemcap with an alloy bolt - Made in MN, USA.
Buy It Now
$16.00 Shipping
Condition: New Location: , China
For 45 degree Bearing.
0 bids $13.95 Shipping
Condition: New Location: , HU
VISION FSA CONE SPACERS ACR Cone Space for Cannondale Systemsix. 160-0190000110 HSSP CONE SPACER ACR to CANNONDALE SYSTEMSIX H2651.
Buy It Now
Free Shipping
Condition: Used Location: Washington, United States
(ZS49 will take a 41mm bearing). Excellent condition, off a 2017 cannondale on which I’m. Cane Creek’s engineers were tasked with developing a no-compromise, best-in-class premium headset. With the introduction of our 110-Series, they did just that — choosing optimal materials, engineering the most effective internals and designing the best aesthetics available in a headset.
0 bids $13.95 Shipping
Condition: New Location: , HU
Alanera RS adapters. The most updated and complete list of bicycle model compatible with DCR system is available on the DCR Tech area of our website.
Buy It Now
$27.36 Shipping
Condition: New Location: , Italy
Nib PMP Series Steering Ultra Light 1" Inch Colnago Cannondale Specialized.... Headset 1" inch Ultra Light Rare
0 bids Free Shipping
Condition: New Location: Johnson, United States
The Hope 1.5 to 1 1/8 step down headset allows you to adapt a 1.5 headtube (not Cannondale) to use a 1 1/8 fork with a low stack height of 13mm. Low Stack Height: Total stack height is 13mm, running alongside the conventional 1 1/8 threadless headset.
0 bids $9.89 Shipping
Condition: New other (see details) Location: Paramount, United States
VERY RARE headset! Headset sat in warehouse storage for a number of years. Headset stands out! Color Variation (See pictures for all cup sizing). Product Usage We'll do our best to assist based on our experience.
0 bids Free Shipping
Condition: New Location: American Fork, United States
If you need to convert a Lefty or Headshok frame to use a standard 1.5"-1/8" tapered fork, this is the headset you need. This is for Si frames that take the Headshok headset bearing straight into the frame without the use of cups. Frames that are like this include the Rize/RZ, Scalpel 29, F-Si series and some carbon bikes. If you have "System Integration" written on black cups pressed into the frame, this will work, but it presses into those cups increasing the stack height. Kit includes bearings, crown race, adapters, top bearing wedge, top plate, and optional stack height spacer for the bottom for increased crown clearance with certain forks.
Buy It Now
$2.99 Shipping
Condition: New Location: American Fork, United States
Original Cannondale headset for IS42/IS52 frames and straight 1 1/8" forks. This is an unusual headset made as a low cost replacement option. Loose ball bearings fit in adapter cups made to fit as IS42 and IS52 bearings. An adapter crown race allows use of a straight 1 1/8" fork in a tapered headtube frame. Kit includes: upper conical spacer, uppber wedge, upper wedge race adapter, rubber upper bearing seal, upper caged bearing set, IS42 upper adapter cup, IS52 lower adapter cup, lower caged bearing set, and adapter crown race.
0 bids Free Shipping
Condition: New Location: American Fork, United States
Original Cannondale conversion adapter headset. If you need to convert an Si Lefty or Headshok frame to use a standard 1.5"-1/8" tapered fork, this is the headset you need.This is for Si frames that take the Headshok headset bearing straight into the frame without the use of cups. Frames that are like this include the Rize/RZ, Scalpel 29, Flash, 1st Gen F-Si series, and many others.Lower cup extends the head tube approximately 12mm.Kit includes:Top Plate. Upper and lower bearings. Three micro spacers. Upper wedge. Upper Reducer. Lower cup. Crown race.
0 bids Free Shipping
Condition: New Location: American Fork, United States
Cannondale Integrated Headset - Adapts Headshok Headsets to use with 1.5" Fork - KP119 If you are trying to convert a Lefty or Headshok frame to use a standard 1.5" fork, this may be what you need. There are a couple different kinds. This is for frames that take the Headshok headset bearing straight into the frame without the use of cups. Frames that are like this include the Rize/RZ series and some carbon bikes. If you have "System Integration" written on black cups pressed into the frame, this will work, but it presses into those cups increasing the stack height.
Buy It Now
$2.99 Shipping
Condition: New Location: American Fork, United States
This top plate comes with the SuperSix Evo headset and sits on top of the upper bearing. It goes underneath the conical spacer unless you are taking that off and are slamming that stem. Compatible with SuperSix Evo, CAAD10, CAAD12, CAAD13, and Synapse Carbons models after 2014. New pieces will not have the SuperSix logo printed in the future. This piece is 46mm in diameter.
0 bids Free Shipping
Condition: New Location: American Fork, United States
Original Cannondale tapered headset for 1 1/8" to 1 1/4" (IS42 to IS47) headtubes. Fits a variety of Cannondale frames including SuperSix EVO generation 1 and 2, 2014+ Synapse Carbon, among many others. Headset includes: Glossy carbon conical spacer (47mm OD, 25mm tall, aluminum top plate (KP253/), plastic upper bearing wedge, IS42 upper bearing, IS47 lower bearing, lower bearing seal, crown race, and compression assembly w/ 5mm built in spacer.
0 bids $2.99 Shipping
Condition: New Location: American Fork, United States
Original Cannondale headset for tapered headtubes with integrated bearings. Kit includes: conical upper bearing cover, aluminum upper bearing wedge, IS42 upper bearing, IS52 lower bearing, and 40mm crown race.
0 bids Free Shipping
Condition: New Location: American Fork, United States
Original Canondale headset for 2017 generation SuperX with Si headtube and 1.5" to 1 1/8" tapered fork.Kit includes:Lower Si to 1.5" bearing. Upper headset reducer cup. Upper headset bearing. 23mm tall carbon fiber conical spacer. Three microspacers. Upper bearing wedge. Compression assembly.
0 bids Free Shipping
Condition: New Location: American Fork, United States
Cannondale Integrated Headset - Adapts Headshok Headsets to use with 1 1/8" Fork - KP058 If you are trying to convert a Lefty or Headshok frame to use a standard 1 1/8" fork, this may be what you need. There are a couple different kinds. This is for frames that take the Headshok headset bearing straight into the frame without the use of cups. Frames that are like this include the Rize/RZ series and some carbon bikes. If you have "System Integration" written on black cups pressed into the frame, this will work, but it presses into those cups increasing the stack height.
0 bids Free Shipping
Condition: New Location: American Fork, United States
Original Cannondale Head Block steer stop headset for ZS44/ZS56 frames. This headset allows you to prevent the fork from turning so far that it may come in contact with the downtube on the frame which is sometimes common on smaller frame. Kit includes: upper locking conical spacer, upper locking plate, upper bearing wedge, upper bearing, ZS44 cup with stop, ZS56 lower cup, lower bearing, and 40mm crown race. .
Buy It Now
$2.99 Shipping
Condition: New Location: American Fork, United States
Cannondale Headshok/Lefty Headset Upper Bearing Seal for carbon frame integrated headsets.Brass ring with black rubber seal. This model is for carbon frames that have an outer headtube diameter of 58mm. This ring is required for proper spacing at installation of Lefty and Headshok steerer tubes and stems.This is the middle of the three sizes in outer diameter. Fits most carbon frames, but the biggest size (QSCSEAL) fits the biggest headtubes.Kit includes one upper bearing seal. Photos of all 3 are for comparison only.
Buy It Now
$2.99 Shipping
Condition: New Location: American Fork, United States
Original Cannondale headset compression wedge with flat top spacer for bikes with 1 1/8" upper steer tube. Expanding lower takes 4mm hex wrench to expand, upper takes 5mm hex wrench to tighten. Super light aluminum construction weighs just 13 grams as pictured.
0 bids Free Shipping
Condition: New Location: American Fork, United States
Complete replacement headset for many of Cannondale's 1 1/8" threadless SI frames and forks over the years. A dirty, worn, or damaged headset can make for a scary ride! Get an original Cannondale headset and get your steering back under control.Includes the following required items:Upper and lower 1 1/8" bearing. Crown race. Wedge for top bearing. 25mm Carbon conical spacer. Fits many models including Slice, CAAD9, CAAD8, CAAD7, Synapse, and Tandem.
0 bids Free Shipping
Condition: New Location: American Fork, United States
Complete replacement headset for SuperX series frames and tapered forks. A dirty, worn, or damaged headset can make for a scary ride! Get the original Cannondale SuperX headset and get your steering back under control.If you are getting creaking and clicking, clean up that headset. You may even need to replace parts after enough miles. Includes the following required items:Lower 1.25" bearing. Upper 1 1/8" bearing. Crown race. Wedge for top bearing. Spacer with cantilever brake stop. System Integration expanding compression device for carbon steer tubes. When not using the headset mounted cable stop for the front brake, Cannondale recommends using the EVO headset, KP203.
0 bids Free Shipping
Condition: New Location: American Fork, United States
Original Cannondale headset for 2018 generation Synapse carbon frames.This headset fits frame sizes 56cm, 58cm, and 61cm.Use kit K35018 for 44 and 48cm frames. Use kit K35028 for 51 and 54cm frames. Use kit K35038 for 56, 58, and 61cm frames.Headset includes:Carbon conical spacer. Flat alloy top plate. Upper bearing wedge. 1 1/8" upper bearing. 1 3/8" lower bearing. Crown race not included as it is integrated into the fork.
Buy It Now
Free Shipping
Condition: New Location: American Fork, United States
Original Cannondale headset compression wedge with integrated 5mm top spacer for bikes with 1 1/8" upper steer tube. This kit allows you to get more clamping surface and proper headset bearing preload without adding a separate spacer on top of the stem. Get a cleaner look and easier headset adjustment with this style cap. .
Buy It Now
$16.00 Shipping
Condition: New Location: , China
CAAD10~ CAAD13. 2012-2019 SuperSix EVO. Just like Cannondale KP203 headset. Lower headset bearing 1pc. Upper Headset bearing 1pc. Ball Material:Nitrided Silicon Ceramic SI3N4. Enclosure: Two Seals.
Buy It Now
$16.00 Shipping
Condition: New Location: , China
BearingID: 27mm ,OD: 38mm ,Thickness: 6.5mm. headset bearing 2pcs. Hybrid Ceramic Bearing. 2 Types of Bearing Option Regular Bearing ：. Race Material: P6 bearing steel. Ball Material:Nitrided Silicon Ceramic SI3N4.
0 bids $4.65 Shipping
Condition: Used Location: Tyler, United States
Vintage Bontrager Top Cap Color - Silver w/black underside Weight - 8g Material - Aluminum Stem size use - 1 1/8" This is a used item with scratches. (see pictures for actual condition). Thanks and Happy Bidding!!!
|
|
|
|